The geometry is not in the catalogue
A gate valve, a globe valve and an actuated control valve do not share one envelope. Bonnet height, stem projection, handwheel sweep and instrument tubing each change what a removable cover has to clear.
Custom RFQ · custom valve insulation jackets
Removable Valve Insulation With Room to Operate
Explore fitted gate, globe and control valve jackets. Send a drawing or scaled photo so we can review bonnet clearance, actuator travel and maintenance access.
The procurement problem01 02 03
Check fit and access before ordering
A quote built on assumptions gets revised
Mixed units, an unstated datum or a missing maximum temperature tend to reappear later as a drawing revision. We ask for the measurement record up front and keep open questions written down.
One valve is rarely the whole job
If the line also has flanges, strainers or traps, they can be listed in the same RFQ with consistent tags and units instead of scattered across separate emails.
Fit and service access
Prepare your equipment details
01
What to have ready
Valve type and size; a dimensioned drawing or scaled photographs; operating and maximum temperature; working medium; indoor or outdoor location; the access points that must remain clear; quantity.
02
No drawing yet?
Use the photos-and-measurements path. Provide clear images from two angles with a scale reference and the key dimensions with units, and state where each dimension was taken from.
03
Match the jacket to the duty
Include equipment surface temperatures, weather or washdown exposure and any surface-temperature target. Agree the construction and acceptance checks in the written quotation.
RFQ STEP 3
Attach the drawing or photos
PDF, JPG or PNG, up to 5 files and 10 MB each. If you do not have a final drawing, a short description and one photo with a scale reference are enough to start.
Start a drawing-led RFQ →Steam trap caveat: If your project includes steam traps, whether a trap should be insulated depends on the trap type and the manufacturer’s guidance. We do not recommend covering all trap types.
MULTI-ITEM PROJECTS
One organised RFQ
Add several TERCC-RD reference codes from the gallery, or paste an item schedule. Use one unit system and one revision identifier per drawing.
Open the gallery →